50 Anchors + 50 Screws + 50 Washers + 1 Drill Bit

Description

The Elephant Anchor provides a secure hold for your TV from within various hollow materials 3/8″ – 3″ thick including drywall, MDF, sheetrock, plasterboard, plaster and lath, wallboard, sheet rock, gypsum board, buster board, custard board, or gypsum panel and concrete block.

What’s Included in this TV Mounting kit:

• 50pcs of 1/4-20 Elephant Anchors
• 50pcs of 1/4-20 Screws
• 1/2″ Titanium Pilot Head Drill Bit to cut through metal stud easily

Product Specs:

• Specific Uses For Product – Wall with Metal Studs, Mounting when there are no studs in hollow wall.
• Mounting Hole Size – 1/2″
• 5 X Faster Installation than Wing Toggles & Molly Bolts
• Use with Fixed or Tilting TV Mounts
• Hang TVs up to 200lbs with Elephant Anchors.
• Not For Swivel TV Mounts or TV Mounts with arms

Strong & Easy-To-Use TV Mounting Anchors

This product can also used for mounting on metal stud walls and mounting when a stud is not available or Stud does not line up to mounting holes of TV mounts.

✔They make smaller holes (1/2″ Holes) and are 5x faster to install the wing bolts or wing toggles

✔Finger shaped curved grips to hold plastic strap to install threaded metal channel

✔Time Saver — 10-20 minutes faster then any wing or molly anchors per wall mounting project

✔Elephant anchors install independently without bolt unlike traditional wing anchors.

✔Installs through Drywall, Sheetrock, Plasterboard, MDF, Lathe and Plaster, Plywood, Metal Studs.

✔Bolt can be removed and fastened at anytime without threaded metal channel falling into wall