How to Fix a Wall Anchor That’s Not Holding?
With a few easy steps, you can troubleshoot and fix the issue to ensure a secure and lasting installation.
Wall anchors are essential for securely mounting items like TVs, shelves, and artwork to walls, but what happens when your wall anchor isn’t holding up its end of the bargain? Whether you’re dealing with a loose anchor, a pulled-out screw, or a hole that’s too big to work with, it’s frustrating when your project doesn’t go as planned.
Fortunately, fixing a wall anchor that’s not holding doesn’t have to be complicated.
1. Assess the Problem
Before you can fix the issue, it’s important to understand why the anchor isn’t holding. There are a few common reasons why a wall anchor might fail:
- Incorrect anchor type:
Using the wrong type of anchor for your wall material (drywall, plaster, metal studs) can result in poor holding power. - Overloaded anchor:
If you’ve mounted something too heavy for the anchor to bear, it may not hold. - Improper installation:
If the anchor wasn’t installed properly, it may not be fully expanded behind the wall, causing it to loosen. - Damaged anchor:
In some cases, the anchor itself may be defective or worn out, which can prevent it from holding the screw properly.
Once you identify the issue, you can decide on the best solution to fix the problem.
2. Remove the Failed Anchor
If your wall anchor isn’t holding, the first step is to remove it. If it’s a plastic anchor, you can usually pull it out with pliers or a screwdriver. For metal anchors, you may need to use a drill to remove it carefully.
Be sure to avoid damaging the surrounding wall, especially if you’re working with drywall or plaster. If the hole left behind is small, you can proceed to the next step. However, if the hole is large, you may need to repair it before inserting a new anchor.
3. Repair the Hole (if Necessary)
If the anchor hole is too big or the surrounding wall is damaged, you’ll need to fill it before installing a new anchor. Here’s how to do it:
- For drywall or plaster walls:
Use spackle or joint compound to fill the hole. Apply the compound with a putty knife, ensuring that it completely fills the hole and smooths over the surface. Allow it to dry completely, and then sand it smooth. - For larger holes:
If the hole is quite large, consider using a wall repair patch. These patches provide a stronger surface for the anchor to hold onto.
Once the wall is repaired, you can proceed to install the new anchor.
4. Choose the Right Anchor
Choosing the correct anchor for your wall type and the weight of the object you’re mounting is crucial. There are several types of anchors to choose from, and using the right one ensures that your mount will hold securely:
- Plastic anchors:
Best for lightweight items on drywall. - Toggle bolts:
Ideal for heavier items or hollow walls. - Molly bolts:
Good for medium-weight objects on drywall and other soft materials. - Elephant Anchors:
Perfect for metal studs and can hold up to 200 lbs per anchor, making them a great choice for heavy-duty items like TVs.
If you’re mounting something heavier, always opt for anchors that are rated for a higher weight capacity to avoid further issues.
5. Install the New Anchor
After selecting the right anchor, install it according to the manufacturer’s instructions. Here’s a general guide:
- Drill a pilot hole:
Use a drill bit that matches the size of the anchor. - Insert the anchor:
Push the anchor into the hole until it’s flush with the wall. For some types of anchors (like toggle bolts), you may need to insert them while they’re still collapsed and allow them to expand once inside the wall. - Secure the screw:
After inserting the anchor, place the screw or bolt into the anchor and tighten it. Be sure not to overtighten, as this could damage the anchor or wall.
6. Test the Hold
Before hanging your item, test the anchor by gently pulling or tugging on the screw. This will ensure that the anchor is properly seated and holding securely. If it feels loose or doesn’t hold, it’s a sign that you may need to use a different anchor or make further repairs.
7. Prevent Future Issues
To prevent wall anchors from failing in the future, here are a few tips:
- Always use the correct type and size of anchor for the weight of the item and your wall material.
- Make sure the anchor is inserted properly and fully expanded behind the wall.
- Avoid overtightening the screws, as this can damage the anchor or the wall.
- If you’re unsure about your wall type or the right anchor to use, don’t hesitate to consult a professional for advice.
Conclusion
Dealing with a wall anchor that’s not holding can be frustrating, but with a little patience and the right tools, you can easily fix the problem. By assessing the cause of the issue, choosing the correct anchor, and following the proper installation steps, you’ll ensure a strong, secure hold for your mounted items. So, whether you’re mounting a TV, shelves, or artwork, remember to use the right anchors and installation methods to avoid common pitfalls and keep your DIY projects on track!