How to use the measure app on Iphone to Mount a tv?
Mounting a TV on drywall with the correct measurements is made much easier with the iPhone’s Measure app, which uses augmented reality (AR) to provide accurate distance readings and dimensions directly on-screen. Here’s a comprehensive guide on using the Measure app to plan out and accurately place a TV mount.
1. Setting Up the Measure App for TV Mounting
To get started, open the Measure app on your iPhone. Make sure you have good lighting and clear visibility of your wall. The Measure app will prompt you to move your iPhone around so it can calibrate with the area, using AR technology to detect surfaces. This is crucial for accurate measurements.
2. Measuring the Wall for TV Placement
Once the app is calibrated, you’ll see a small white circle with a dot on your screen. Position this dot where you’d like the bottom of your TV mount to sit and tap the + button to mark the starting point. Slowly raise your iPhone to the desired height for the top of the mount and tap + again to finish the line. The app will display the height between these two points, giving you a precise measurement. Repeat this process for the width of the mount if your TV requires specific clearance on either side. This will allow you to visualize the TV’s placement and confirm that it fits within the desired wall space.
3. Measuring for Anchor or Stud Placement
Many mounts require anchors or screws to be positioned at specific points. The Measure app can help by measuring these spaces accurately. Begin by marking where the mount will go, and use the app to measure the distance between the screws or anchor points to ensure even spacing. By holding your phone steady and aligning it with each anchor point, you can measure the required distances without needing a physical tape measure.
4. Using the Level Tool for Alignment
Ensuring your TV is level is just as important as the height and width measurements. The Measure app includes a Level feature that can help you verify this. Tap the Level icon within the Measure app, and hold your iPhone against the mounting bracket or along the marked line where your mount will sit. The app will display a zero-degree reading if your surface is level. For any adjustments, tilt the phone slightly until it reads zero. This will help ensure your mount and TV are straight.
5. Saving and Reviewing Measurements
As you measure, the Measure app allows you to take a screenshot of each measurement, which is helpful for reference. Simply tap the Capture button after each measurement to save a screenshot to your Photos. This is a great way to double-check your placements before drilling into the drywall and helps prevent mistakes that might require patching later.
6. Final Placement Check
After measuring, review your saved screenshots to ensure accuracy. Cross-check the height and width with the specifications of your TV mount. Once all measurements align, you can proceed to drill with confidence, knowing your mount will be placed exactly where intended.
Using the Measure app on an iPhone not only simplifies the process of mounting a TV but also minimizes the need for additional measuring tools, reducing setup time and enhancing accuracy. Following these steps will help ensure a properly aligned and secure mount on your drywall.
For detailed steps and tips on the Measure app, check resources from Apple Support or tutorials on iGeeksBlog and MacRumors.